seawens
ELO AccuTouch™ 5-Wire Resistive touch panels are the top-tier industrial touch solution trusted worldwide for automation, medical, POS and transportation equipment repair. Adopting exclusive glass-base 5-wire resistive architecture, it delivers ultra-stable, zero-drift positioning performance even under long-term heavy-duty operation.
Unlike common 4-wire touchscreens, all driving circuits of ELO AccuTouch are laid on the rigid bottom glass instead of the flexible top film. Minor scratches or abrasion on the upper conductive layer will not cause coordinate offset or touch failure, greatly extending service life. The pressure-sensitive design supports operation with bare fingers, oil-resistant work gloves, plastic stylus and hard tools, perfectly adapting to dusty, oily, humid factory environments where capacitive touch cannot work normally.
Core Advantages
- Drift-free constant calibration: No frequent recalibration after installation
- Industry-leading lifespan: Up to 35 million single-point touch activations
- 4H high-hardness anti-scratch surface coating
- IP65 & NEMA 4/4X sealed front panel, resistant to water splashes, chemical splatters and metal dust
- Ultra-light touch activation force, quick response less than 10ms
- Wide temperature range for indoor and semi-outdoor equipment
- Standard FPC, USB and RS232 interfaces, fully compatible with original ELO controllers and mainstream brand HMI
| Item | Parameter |
|---|---|
| Official Series | ELO AccuTouch® 5-Wire Resistive |
| Touch Technology | Single-touch pressure sensing, glass substrate 5-wire structure |
| Resolution | 4096 × 4096 |
| Touch Accuracy | Deviation ≤ 2mm |
| Response Time | ＜10ms |
| Surface Hardness | 4H (ASTM D3363) |
| Service Life | 35 million touches at single point |
| Operating Temperature | -10℃ ~ +70℃ |
| Storage Temperature | -30℃ ~ +80℃ |
| Environmental Protection | IP65, NEMA4/4X/12 |
| Light Transmittance | 80%±5% |
| Supply Voltage | 3.3V–5V DC |
| Standard Sizes | 7inch, 10.4inch, 12.1inch, 15inch, 17inch, 19inch, 22inch |
| Structure | Film on Glass (F+G) |
| FPC Definition | X+, X-, Y+, Y-, GND (5 pins) |
| Certifications | RoHS, REACH, UL, ISO9001 |
Mechanical & Drawing Information
- Overall thickness: 1.8mm / 2.4mm / 3.2mm optional
- FPC position: bottom, left or right customizable
- Mounting: double-sided industrial adhesive tape, custom screw holes available
- Dimension tolerance of key areas: ±0.1mm
- Zero-bezel flat design optional to avoid dust accumulation gaps
Main Application Scenarios
- Industrial HMI terminals: Siemens, Allen Bradley, Proface, B&R, Beijer replacement repair
- CNC machine tools, robot teach pendants, bending equipment control panels
- Medical monitors, hospital diagnostic devices
- Commercial POS, self-service kiosks
- Logistics, vehicle-mounted industrial display equipment
5 Bullet Points for Product Listing
- Original-grade ELO AccuTouch™ 5-wire resistive touch screen with 35-million-touch ultra-long service life
- Glass substrate structure prevents accuracy loss even if the top film gets scratched or worn
- 4H anti-scratch surface and IP65 waterproof & dustproof rating for harsh workshop conditions
- Supports glove, stylus and finger input, stable performance with oil and dust pollution
- Standard 5-pin FPC connector, plug-and-play replacement for ELO and most industrial HMI touch panels
